Determination of length and position of an object which can

Продукт No: P2542001
Principle

This experiment provides training in determining the length and position of an object based on an X-ray image. A metal pin that is embedded in a wooden block is used as the model. This experiment is also an excellent preparatory exercise for demonstrating the principle of computed tomography.

Benefits

  • Simulation of a real-life situation in x-ray diagnostics
  • Application which trains three-dimensional thinking

Tasks

  1. Record a bi-planar radiogram of two perpendicular planes of a metal pin which cannot be seen.
  2. Determine the true length of the pin by taking into account the magnification factor which results from the divergence of the X-rays.
  3. Determine the spatial position of the pin.

What you can learn about

  • X-ray radiation
  • Bremsstrahlung
  • Characteristic radiation
  • Law of absorption
  • Mass absorption coefficient
  • Stereographic projection



Перечень материалов (вы́писка) Продукт Количество
XR 4.0 expert unit, X-ray unit, 35 kV 09057-99 1
XR 4.0 X-ray plug-in unit W tube 09057-81 1
XR 4.0 X-ray fluorescent screen 09057-26 1
XR 4.0 X-ray optical bench 09057-18 1
XR 4.0 X-ray slide for external optical bench 09057-29 1
XR 4.0 X-ray Implant model 09058-07 1
XR 4.0 X-ray Adapter for digital camera 1/4"" 09057-15 1
Slide mount for optical bench expert, h = 30 mm 08286-01 2
XR 4.0 X-ray external optical bench 09057-21 1
Vernier calliper stainless steel 0-160 mm, 1/20 03010-00 1
Table with stem 09824-01 1

Литература по данной статье

Название Продукт Язык
Handbuch Lehrerversuche mit Röntgenstrahlung für die XR 4.0 expert unit, TESS expert Physik 01200-01 DEU
TESS expert Physics Handbook X-ray Experiments for XR 4.0 expert unit 01200-02 ENG
XRI 4.0 X-ray Radiografie Erweiterungsset 09150-88

Назад к перечню

Продукт No: P2542001

Порекомендовать эту страницу  ∇

Поиск информации доступен пока только на английском языке!

Downloads